Symmetricom TimeProvider 100, User Manual, Page: 57 / 124

098-00106-000 Revision A – March, 2009 TimeProvider 100 User’s Guide 57
Chapter 5 CLI Commands
Command Groups
The users assigned to each security level have the following access options:
1.
user
– user class with read-only permissions
2.
config
– power user class with read and write permissions
3.
admin
– administrator user class with read and write permissions and
permission to configure user information
Command Groups
There are eight groups of CLI commands as shown by pressing the TAB key at the
TP100 prompt. Typing a question mark (“?”) after the eight command groups display
provides a description of each command group as show in the following example of
TimeProvider 100 inputs and responses.
Input:
tp100> <tab>
Response:
cli-settings ping set switchfirmware
logout reboot show upgrade
Input:
tp100> ?
Response:
set - Configure TP100 settings
show - Display TP100 information or settings
ping - Determine whether a host is up and display ping statistics
reboot - Reboot this TP100
upgrade - Download firmware to TP100
switchfirmware - Switch between two firmware images
logout - Log out from the current session
cli-settings - Configure CLI setting
tp100>