1
2
USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up to
date user guide, as there may be important updates and
changes you need to be aware of !!!
DESCRIPTION OF THE SAMPLE
BATTERY INSTALLATION
Your clock requires 1 x AAA and 2 x AA alkaline batteries (included) to
operate.
1.Place your unit face down on a flat surface.
2.Press the latch and remove the battery cover at the back of your unit.
3.Insert 1 x AAA and 2 x AA new alkaline batteries into the battery
compartment by observing the correct “+” and “- “polarity.
4.Replace the battery cover.
AUTO KEY-LOCK
Auto key-lock applies to all other buttons (1 minute after no press of any
button). Press and hold
DOWN
button (most right sided button)
to release key lock, two soft and short beep tones will be heard.
TO SET TIME AND THE SNOOZE DURATION
1.Press and hold
SET / TIMER
, the hour digits “
0
” flash. Press
or
to set the time in hours (hold
or
to advance rapidly).
2.Press
SET / TIMER
again, the minute digits “
00
” flash. Press
or
to set the time in minutes. (hold
or
to advance rapidly).
3.Press
SET / TIMER
again, the display shows “
24Hr
” and flashes.
Press
or
to select “
12Hr
” or “
24Hr
” time format. There has
AM
icon to indicate the morning time and
PM
icon to indicate the afternoon
time.
4.Press
SET / TIMER
again, the display shows “
05
” and flashes. Press
or
to select your snooze time from 5 to 60 minutes.
5.Press
SET / TIMER
again or if no key pressed for approx. 10 seconds
to exit the setting mode.
TO SET THE ALARM (default at 6:00 AM)
1.Press and hold
AL SET / SELECT
, the
AL
appear and the alarm’s
hour digits’ flash. Press
or
to set the alarm in hours. (hold
or
to advance rapidly).
2.Press
AL SET / SELECT
once again, the alarm’s minute digits’ flash.
Press
or
to set the alarm in minutes. (hold
or
to
advance rapidly).
3.Press
AL SET / SELECT
again,
and “
HI
” flash (vibration at HI
level), press
or
to select “
LO
” (vibration at Low level) if need.
4.Press
AL SET / SELECT
again,
and “
HI
” flash (Sound at HIGH
level), press
or
to select “
LO
” (Sound at Low level) if need.
5.Press
AL SET / SELECT
once again or no button around 10 seconds
to exit the alarm setting mode. Admist alarm setting, press
SET /
TIMER
once to exit and return to nomral time display mode.
TO SELECT THE ALARM MODE
At normal time display mode, press
AL SET / SELECT
one at a time to
activate the alarm(s), the corresponding alarm indicator(s) on the right
side of the time display will be on:
: only sound alarm is activated
: only shaker alarm is activated
: only strobe light alarm is activated
: both sound and vibration alarm are activated
: both strobe light and sound alarm are activated
Press
AL SET / SELECT
once more to turn off all the alarms, all
alarm indicators disappear.
TO STOP AND RESET THE ALARM TO COME
ON THE NEXT DAY
When alarm is sounding, the corresponding alarm indicator flashes.
Press
AL SET / SELECT
once to stop the alarm and reset it to come on
the following day. After that, the corresponding alarm indicator stays on
the display.
TO USE SNOOZE
When alarm is sounding, presses
once, the alarm will be
stopped temporarily and the corresponding alarm indicator keeps
flashing. Alarm will come on again after the set snooze duration is over.
TO USE BACKLIGHT
Press
once to active backlight 5 seconds.
TO USE FLASHLIGHT
Press and hold
to active flashlight. Press and hold
to de-active the flashlight.
TO USE COUNTDOWN TIMER
(HOUR-MINUTE TIMER)
1.At normal time display, press
SET / TIMER
once, display change to
timer mode,
and
appear with ”
0:00
” flash.
2.Press
to adjust countdown timer in hours, press
to adjust
countdown time in minutes.
3.Press
START / STOP
once to start countdown in minutes, then ”
:
”
and ”
” flash.
4.During counting down, press
START / STOP
to pause counting down
and whole display flashes. Press and hold
START / STOP
to stop or
reset the counting down timer.
SNOOZE / FLASHLIGHT
AM
ALARM
COUNT-UP
(TIMER)
COUNT-DOWN
(TIMER)
DOWN
UNLOCK
SET
TIMER
PM
LOW BATTERY
TIMER
Wake-to-Flashing
LED
Wake-to-
Vibration
Wake-to-Buzzer
UP
TEST
AL SET
SELECT
BACK VIEW
BACK VIEW
(BATTERY COMPARTMENT)
BATTERY COVER
“AA” BATTERIES
“AAA”
BATTERY
START / STOP (TIMER)
