Symbol PTC-2124, User Manual

Page: 15 / 114

DataTAC radio regulations
PTC-2124 User’s Guide 3
ETSI compliance statement
The plug-in radio device used in this equipment has
been tested and found to comply with the European
Telecommunications Standard ETS 300.328. This
standard covers wide-band data transmission systems
referred to in the CEPT recommendation T/R 10.01.
DataTAC radio regulations
The PTC-2124’s internal transmitter has been type
accepted in accordance with FCC CFR Title 47, Part
90. The FCC ID, Canadian DOC ID, or ID number for
another appropriate regulatory agency is on a label on
the back of the PTC.
You must subscribe to the DataTAC radio network
(U.S.), Bell-Mobility (Canada), or the DataTAC
system carrier in the country of operation before using
this internal radio. You will need to provide the
logical link identifier (LLI) number from the label on
the rear of the unit for registration on the network.
See your Symbol representative for information on
subscribing to the network in the country in which the
PTC will be used.
No license is required to operate this product in the
U.S. or Canada. For information on operating
regulations in other countries, see your Symbol
representative.
Mobitex radio regulations
The PTC-2124’s internal transmitter has been type
accepted in accordance with FCC CFR Title 47, Part
90. The FCC ID, Canadian DOC ID, or ID number for
another appropriate regulatory agency is on a label on
the back of the PTC.