Symbol PTC-2124, User Manual

Page: 35 / 114

Setting up the PTC
PTC-2124 User’s Guide 23
Charging the bridge battery
See Chapter 12 for more
information. The bridge battery must be charged before you can
use the PTC. Charging the main battery pack for 5
hours (as instructed in the previous section) will also
fully charge the bridge battery.
Loading software
The operating system and/or the pen operating
environment are loaded into your PTC at the factory.
If you need to load application software, instructions
are provided in the PTC-2124 Software Guide and in
the documentation that accompanies the Symbol Pen-
Based SC400 Software Development Kit. Refer to
Appendix B for ordering information.
Configuring the PTC
See your MS-DOS manuals for an
explanation of the CONFIG.SYS and
AUTOEXEC.BAT files. Your PTC is configured through the MS-DOS
config.sys and autoexec.bat files. These files load
and execute software device drivers and application
programs and can be used to manage your PTC’s
memory. The documentation provided with the
Symbol Pen-Based SC400 Software Development Kit
contains information on configuring your PTC
through these files.