manualshive.com logo in svg

Symbol LS 1220, Product Reference Manual

Share
Download
Symbol LS 1220 Product Reference Manual Download Page 76

8-19

Programming

Code 39 Buffering

For a description of Code 39 Buffering, see page 8-8 .

Code 39 buffering cannot be disabled while there is data  in the transmission buffer. The 
buffer holds 250 bytes of information.

To disable Code 39 buffering, first force the buffer transmission (see Transmit Buffer) or 
clear the buffer.

Buffer Data

To buffer data, Code 39 buffering must be enabled, and a symbol must be read with a space 
immediately following the start pattern.

•

The scanner gives a hi/lo beep to indicate successful decode and buffering. See 
Overfilling Transmission Buffer.

•

The scanner adds the message, excluding the leading space to the transmission 
buffer.

•

No transmission occurs.

Clear Transmission Buffer

To clear the transmission buffer, read a symbol which contains only a start character, a 
dash (minus), and a stop character.

•

The scanner issues a short hi/lo/hi beep to signal that the transmission buffer has 
been erased, and no transmission has occurred.

•

The scanner erases the transmission buffer.

•

No transmission occurs.

CLEAR BUFFER

Summary of Contents for LS 1220









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands