manualshive.com logo in svg

Symbol LS 1220, Product Reference Manual

Share
Download
Symbol LS 1220 Product Reference Manual Download Page 53

6-2

LS 1220 Product Reference Guide

3.

Scan

Make sure the symbol to be scanned is within the scanning range. See Calculating 
The Usable Scan Length Method on page 2-5.

Align the bar code and trigger the unit.

•

The scan beam lights until the programmed Laser On Time-out limit is reached, 
or until a successful decode.

The symbol is successfully decoded when the green DECODE LED lights.

Triggering

The LS 1220 can be energized using any one of seven different methods. Host download 
is not permitted with the scanner activated. To download, send the Laser Off command first. 
A Laser Off command from the host turns off the laser in all of the following modes. Refer 
to Trigger Modes on page 9-19for further details.

Host 

The host sends a Laser On command which activates the laser, and begins the decoding 
process. The external trigger also energizes the laser, and acts as a “Level Trigger” in this 
mode.

Laser and decoding are turned off by any of the following (whichever comes first):

•

Completion of the variable time-on (set in 0.5 second increments to a maximum of 
4.0 seconds)

•

A good decode

•

A Laser Off command from the host.

Level Trigger

When the Trigger signal is pulled to ground, the laser turns on. It turns off by any of the 
following (whichever comes first):

•

Completion of the variable time-on (set in 0.5 second increments to a maximum of 
4.0 seconds)

•

A good decode 

•

The Trigger signal is pulled high.

No host download is permitted while the scanner is activated.

Summary of Contents for LS 1220









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands