manualshive.com logo in svg

Symbol LS 1220, Product Reference Manual

Share
Download
Symbol LS 1220 Product Reference Manual Download Page 64

8-7

Programming

Decode Options

Transmit UPC-E/UPC-A Check Digit

Select if decoded UPC symbols are transmitted with or without a check digit.

Convert UPC-E to UPC-A 

Use this parameter to convert UPC-E (zero suppressed) decoded data to UPC-A format 
before transmission. After conversion, data follows UPC-A format and is affected by UPC-
A programming selections (e.g., Preamble, Check Digit).

EAN Zero Extend

This parameter adds five leading zeros to decoded EAN-8 symbols to make them 
compatible in format to EAN-13 symbols.

Xmit “No Decode” Message

This feature sets the scanner to transmit “NR” when a symbol does not decode. If Prefixes 
and suffixes are enabled, they are appended around this message.

Decode UPC/EAN Supplemental 

Select whether UPC/EAN is decoded with or without supplemental characters. 
Supplementals are additionally appended characters (2 or 5) according to specific code 
format conventions (e.g., UPC A+2, UPC E+2, EAN 8+2). If UPC/EAN with supplemental 
characters is selected, UPC/EAN symbols without supplemental characters won't be 
decoded. 

Decode of symbols containing 2 or 5 supplementals is enabled separately. For example, if 
“2 supplementals” is enabled, only those symbols with 2 supplementals are decoded. To 
decode symbols containing 2 supplementals and 5 supplementals, both must be enabled. 
If UPC/EAN without supplemental characters is selected and the scanner is presented with 
a UPC/EAN plus supplemental symbol, the UPC/EAN is decoded and the supplemental 
characters ignored. If autodiscrimination is chosen, the LS 1220, after additional 
processing to ensure a good decode, transmits either. 

Note: Select either read, or ignore supplemental characters (as 

approprate for your application) to minimize the risk of invalid data 
transmission. Autodiscrimination mode requires additional 
processing to ensure a good decode.

Summary of Contents for LS 1220









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands