manualshive.com logo in svg

Symbol LS 1220, Product Reference Manual

Share
Download
Symbol LS 1220 Product Reference Manual Download Page 66

8-9

Programming

CLSI Editing

Use this parameter to insert a space after the 1st, 5th, and 10th characters of a 14-
character Codabar symbol. The symbol length includes start and stop characters. This 
option may be enabled even with NOTIS Editing enabled.

NOTIS Editing

This option strips the start and stop characters from decoded Codabar symbols. This option 
may be enabled even with CLSI Editing enabled.

UPC-A and E Preamble 

Three options are given for the lead-in characters of decoded UPC-A or UPC-E symbols 
which are transmitted to the host. Select one preamble for UPC-A decodes and one for 
UPC-E decodes. These lead-in characters are considered part of the symbol itself. The 
three options are:

•

a system character only

•

the country code and system character

•

no preamble

The system character is the digit printed to the extreme left of a UPC symbol. The country 
code for UPC is always zero, and it cannot be transmitted without the system character.

Prefix/Suffix Values 

One prefix and up to two suffixes may be appended to scan data for use in data editing as 
shown below. They can be downloaded by the host (parameters 27, 28 and/or 29). See 
Table 8-4 Programming Protocol on 8-24 . Or, they may be set by scanning a three digit 
number (i.e., three bar codes) that corresponds to ASCII keycodes. See Table 8-5 on page 
8-32.

<Prefix> <Data> <Suffix> <Suffix>

where:

<Prefix> =

ASCII value selected by user

<Data> = 

scanned bar code data

<Suffix> =

ASCII value selected by user

Note: If ASCII value “128” is selected for either prefix or suffix, that function 

is disabled.

Summary of Contents for LS 1220









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands