Symantec Packager, Implementation Manual

Page: 38 / 98

38 Configuring custom products
Working with custom products
Each phase of Symantec Packager relies on the output from previous phases. If
you edit a custom product, all built packages that include the product do not
change until you rebuild them.
This procedure details the minimum steps required to create a product
configuration file. You can customize the product configuration file.
To create custom products
1
In the Symantec Packager window, on the Configure Products tab, on the
File menu, click
New Product Configuration .
2 In the Product Selection dialog box, select the product that you want to
configure, and then click
OK .
If no products appear in the Product Selection dialog box, you might need to
import a product module in Symantec Packager. Click
Cancel and return to
the Import Products tab.
See
“Importing product modules” on page 32.
3
In the Product Editor dialog box, click OK .
4 In the Save As dialog box, type a name for the custom product, and then
click
Save .
The product configuration file appears on the Configure Products tab.
Viewing product details
Symantec Packager lets you view the details of a product configuration file
without opening the file. A summary of all product configuration details is
available using the Display Details option.
To view product details
1 In the Symantec Packager window, on the Configure Products tab, select the
product configuration file whose details you want to view.
2 On the File menu, click Display Details .
3 Click OK to close the Details window.