Symantec Packager, Implementation Manual

Page: 21 / 98

21 Installing Symantec Packager
Installing Symantec Packager
Installing Symantec Packager
The Symantec Packager installation program checks for the required software
and hardware resources, lets you select the installation folder, updates registry
settings, and copies the required files to your hard disk. The installation
program also checks for Windows Installer 3.1. If Windows Installer 3.1 is not
installed, the Symantec Packager installation program installs it.
When the installation is complete, Symantec Packager automatically imports
any product modules that it finds on the installation CD.
Installing Symantec Packager from the installation CD
When you insert the CD that contains the Symantec Packager installation
program into your CD-ROM drive, an installation window displays the products
that you can install.
If the installation screen does not appear automatically after you insert the
installation CD, run the setup program manually, and then continue with the
installation process.
See “Starting the Symantec Packager installation program manually” on
page 22.
You should close any applications that are open before you start the installation
process.
To install Symantec Packager from the installation CD
1 Insert the installation CD into the CD-ROM drive.
2 In the installation window that appears, click Install Symantec Packager .
3 In the Welcome panel, click Next .
4
In the Customer Information panel, type a user name and organization, and
then click
Next .
5 In the License Agreement window, click I accept the terms in the license
agreement , and then click Next .
6
In the Destination Folder panel, do one of the following:
■
To use the default destination folder, click Next .
■
To change the destination folder, click Change , specify a new location,
click OK , and then click Next .
7 In the Ready to Install the Program panel, click Install .
Symantec Packager copies files to the destination folder that you specified.