Symantec GHOST 14 Page 52 Manual Download

Page: 52 / 184

Periodically review the Status page. You can also

review the events log on the Advanced page.

The event log records events when they occur,

backups and any errors that might have occurred

during or after a backup.

If you do not see the Advanced page tab, click View >

Show Advanced Page.

Note:

Backup status and other messages are also

conveyed in the system tray. So you do not even need

to start the product to identify the status of your

backups.

See

“Verifying that a backup is successful ”

on page 86.

Review the Status page to verify

that backups have happened and

to identify any potential problems.

Delete outdated recovery points to make more hard

disk space available.

Also, reduce the number of file versions that are

created by file and folder backups.

See

“Managing recovery points”

on page 127.

See

“Managing file and folder backup data”

on page 133.

Manage storage space by

eliminating old backup data.

Check the Status page on a regular basis to ensure

that each drive has a defined backup.

Review the level of protection that

is provided for each of your

computer's drives.

Store backup copies of your recovery points in a safe

place. For example you can store them elsewhere on

a network, or you can store them on CDs, DVDs, or

tapes for long-term, off-site storage.

See

“Making copies of recovery points ”

on page 129.

Maintain backup copies of your

recovery points.

Additional tips about backups

Consider the following tips when you run a defined backup:

■

Norton Ghost does not need to be running for a scheduled backup to start.
After you define a backup, you can close Norton Ghost.

■

The computer that is being backed up must be turned on and Windows must
be started.

■

All defined backups are saved automatically so that you can edit them or run
them later.

Best practices for backing up your data

Additional tips about backups

Summary of Contents for GHOST 14

























































































































































































Search results

Summary of Contents for GHOST 14

Reviews:

Related manuals for GHOST 14

Brands by name

Popular brands

Symantec GHOST 14, Manual

Search results

Summary of Contents for GHOST 14

Reviews:

Related manuals for GHOST 14

Brands by name

Popular brands