31
Installing Symantec Mail Security for SMTP
Installing Symantec Mail Security for SMTP
To test your DNS server
◆
Run the NSLookup command using the following format:
nslookup <IP address or server name>
For example, nslookup 155.55.55.55
The IP address should resolve to your server name and the server name
should resolve to your IP address.
Note:
You should run NSLookup twice (once in the format nslookup
<host name> and once as nslookup <IP address>).
Running the installation script or setup program
You must run the installation script (Solaris) or setup program (Windows 2000
Server) to install Symantec Mail Security for SMTP.
Run the installation script or setup program
The Symantec Mail Security for SMTP files are included on the installation CD.
For Solaris, you must be logged on as root.
For Windows 2000/2003 Server, you must be logged on with administrator
privileges.
To run the Symantec Mail Security for SMTP installation script on Solaris
1
Change (cd) to the location of the installation files.
2
Type the following command to run the installation script:
sh smssmtp.sh
3
Follow the on-screen instructions.
A transcript of the installation is saved as /var/log/SMSSMTP-install.log for
later review, if necessary.
4
Verify that the software is running by viewing the Status page.
The Date server started field should be current.
See
“About the Status page”
on page 141.
Summary of Contents for 11105111 - SYM MAIL SEC SMTP 5.0 SMS PORT MEDIA CD EN
