41
▼
Remote access with the handset
You can operate your answering system from another room using a handset.
1.
With the phone in standby mode, press
REMOTE/SELECT
on the handset.
Remote AnsweringMachine operation
appears on the display. The
answering system announces the current time and the number of messages stored
in the memory.
2.
You hear "To play incoming message, press
2
. For help, press
0
."
You hear intermittent beeps.
3.
Enter a command within 15 seconds. You may select a command from the
following chart:
4.
After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this
time from the chart on step 3.
5.
When you are finished, press
END
to exit the system. The answering system
automatically returns to standby.
NOTES:
• If you press
END
before the base is connected, the phone will return to standby.
• If the base is not connected within five seconds, you hear beeps and the phone will return
to standby.
• The base's keypad is disabled during remote operation.
• If you receive a call, the remote operation is canceled.
• During the remote operation [ - - ] appears on the base.
• If you have new messages and old messages, only the new messages will be played.
After you have reviewed your new messages, you can play your old messages by
pressing
/2
again.
Command
Function
/ 1
Repeat a Message
/ 2
Play Incoming Messages
/ 3
Skip a Message
/ 4
Delete a Message
/ 5
Stop Operation
6
Answering System On
9
Answering System Off
0
Voice Prompts
UP045DH(ST88246) OM ENG 3/31/04 3:49 PM Page 41
Summary of Contents for ST88246
Page 2: ......