15
STORING PHONE NUMBERS AND NAMES
Memory Dialing allows you to dial a number using just a few key strokes. Your ST88246
stores up to 10 names/numbers in the handset.
1) Press
MEM
then “
Select Memory
”
is displayed.
2) Press
/VOL
and
/VOL
, or enter a number
(0 - 9) to select the memory location where
you would like to store the number.
3) Press
REMOTE/SELECT
twice. The
following screen appears and a cursor
flashes indicating that the display is ready for
the name to be entered.
If this screen appears, the selected memory
location is already stored. Then you must
either change the entry in this location,
clear the entry in this location, or select
“
Go Back
” to choose another location.
4) To enter a name (up to 13 characters), use the number keys.
•See the “Steps for entering names and special characters” (See page 16).
•Use
#/
and
/TONE/
to move the cursor to the desired location.
•Use
CH/DELETE
to delete characters as needed.
•Press and hold
CH/DELETE
to delete all the characters.
•If a name is not required, go to step 5.
5) Press
REMOTE/SELECT
. “
Store Number
”
is displayed. The cursor flashes indicating
that the display is ready for the number to
be entered.
6) Use the number keys,
#/
or
/TONE/
to
enter the phone number. The phone number
cannot exceed 20 digits.
Use
PAUSE/REDIAL
to enter a pause in the dialing sequence.
The display shows a “
P
”. Each pause counts as one digit and represents a two
second delay of time between the digits as they are sent.
Use
CH/DELETE
to delete digits as needed.
S e l e c t M e m o r y
0 1
0 2
E d i t M e m o r y 0 2
D e l e t e M e m o r y 0 2
G o B a c k
S t o r e N a m e
MEMORY DIALING
UP045DH(ST88246) OM ENG 3/31/04 3:47 PM Page 15
Summary of Contents for ST88246
Page 2: ......