3
Installing the 4-port Adapter
3-6 Sylantro 4-Port Adapter Installation Guide
Table 3-1 describes each of the required adapter configuration commands.
Table 3-1
Adapter Configuration Commands
Step
Command
Display
Task
1
01 xxx*xxx*xxx*xxx#
ENTER IP ADDR:
Enter the IP address of the adapter.
2
02 255*xxx*xxx*xxx#
ENTER NETMASK:
Enter the netmask.
3
03 xxx*xxx*xxx*xxx#
ENTER GATEWAY:
Enter the IP address of the gateway.
4
04 xxx*xxx*xxx*xxx#
ENTER C_SERVER:
Enter the IP address of the Control Server.
5
10 xxx*xxx*xxx*xxx#
ENTER DNS IP ADDR
Enter the IP address of the DNS server.
6
11 company.com#
ENTER DNS DOMAIN
Enter the domain name of the service provider’s
DNS server.
To enter a character, use the following format:
<numeric key associated with the character> +
<the position of the character on the numeric key>
For example, 21 represents the character A and
22 represents the character B. If the DNS domain
is Sylantro.com, you would enter:
11 73 93 53 21 62 81 72 63*23 63 61
The corresponding letters appear on the phone
LCD as you enter the domain name.
The zero key (0) erases the previously entered
character. If the entire string is erased, 0 restarts
the DNS Name configure menu.
7
20 xxx#
1
1. The IP TOS command is optional. All other commands listed in Table 3-1 are required.
ENTER IP TOS
Enter the IP type of service. Recommended value
is 188. For more information, refer to Table 3-2.
8
05
SAVE CONFIG
Save the configuration.
06
CANCEL CHANGES
Cancel the configuration and restore the defaults.
9
99
Reboot the adapter.
Note:
If the numbers from the service provider start with a 0, do not enter
the prefix before entering the numbers from the service provider.
Summary of Contents for 4-Port Adapter
Page 4: ......
