3
Installing the 4-port Adapter
3-2 Sylantro 4-Port Adapter Installation Guide
Connecting Phones to the Adapter
Customer telephones connect directly to the 4-port adapter using a standard RJ-11
telephone wire as displayed in Figure 3-1.
Figure 3-1
Connecting Phones to the Adapter
Caution:
You should always connect phones to the adapter before
connecting the power. If the adapter powers on when no phones are
connected, the digital adapter automatically configures itself for three
digital ports and one analog port. In this case, the TOSH 4 port on the back
of the digital adapter cannot be used for a fourth Toshiba phone.
Warning:
Never install telephone wiring during an electrical storm.
Warning:
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
4port_phone_connect
POTS
+5VDC IN
ENET
RESET
RS 232
TOSH 4
TOSH 3
TOSH 2
TOSH 1
Adapter (back)
Summary of Contents for 4-Port Adapter
Page 4: ......