RE729 Programming Manual to PSWx29 VoX.docx
-
2
-
1 Content
1
Content ........................................................................................ 2
2
Introduction .................................................................................. 2
2.1
Quick Start Instructions ............................................................... 2
3
Single Chanel Pager .................................................................... 2
4
Multi Channel Pager .................................................................... 6
5
Advanced User Guide ............................................................... 11
5.1
Step 1: Read Pager ................................................................... 11
5.2
Step 2: Define Profiles (Frequencies) ........................................ 11
5.3
Step 3: Define Addresses .......................................................... 12
5.4
Step 4: Define Options Settings ................................................ 14
5.5
Step 5: Menu ............................................................................. 18
5.6
Extra feature: Composing alert melodies ................................... 20
2 Introduction
Thank you for purchasing the RE729 programming kit. This programming kit allows
you to customize many features of the RE729 pager. Almost Everything on the
display is customizable, from the icons shown, to the order in which you scroll
through them. If you have users that are confused by too many icons on the display;
know that you can remove all of the icons, using the programming software, and
have a pager that has a one button operation- much like the old Keynote pager.
2.1 Quick Start Instructions
The Quick Start Instruction describes the basic settings as recommended by
Swissphone llc. More detailed instructions for the advanced user can be found in
chapter 5 Advanced User Guide.
3 Single Chanel Pager
Select COM port
Ensure that the proper COM
port is selected. If you are using
a USB to serial converter select
“USB serial port.”
Read pager
Place the pager in the
programmer and click “Read”
