RE729 Programming Manual to PSWx29 VoX.docx
- 17 -
Message overview
A graphic overview of received calls is displayed when retrieving a message. A call in
Group A corresponds to a dash in the first column of the display. 3 dashes mean 3 or more
calls in one Group (A, B, C, or D)
Discreet without beep
No:
Discrete alert: vibrate first, then mini-beep then speech.
Yes: Discreet alert: only vibe and speech
Alert ack., voice on
No:
When acknowledging a call while the receiver is still beeping, the voice
message will not be heard
Yes: When acknowledging a call while the receiver is still beeping, the voice
message will still be heard. To silence the voice message press "right"
once
more.
Manual monitoring (longpress PTL)
If checked the pager can be temporarily put in monitor mode by pressing
and holding down the CONFIRM button.
Playback in monitor mode
If checked, the pager can playback stored messages in monitor mode.
Playback in silent mode
If checked, the pager can playback stored messages in silent mode.
Tones
Button click ON: The buttons will make clicking sound when pressed.
Switch-off beep: The pager will beep when being switched off.
Switch-on beep: The pager will beep when being turned on.
Call reminder
No:
A reminder will not be issued for missed alerts.
Yes: A reminder will be issued for alerts that are not acknowledged. A
warning tone is sounded.
The number of reminders and the time interval between reminder tones can be set.
Call suppression
Call suppression detects alerts occurring on the same address within a specified period of
time. The same address will not be alerted again within this period of time. Call
suppression counts the time since the last call was received.
Priority channel
All selected channels are scanned in the specified order
