Safety and approval
VI
KAP01.FM5
Pronto 32i, englisch: A30853-X300-F507-1-7619
20.5.99
Safety
and approval
The Pronto 32i complies with European standard EN 60
950, which deals with the safety of information technolo-
gy appliances including electronic office equipment. This
device has been designed with safety in mind, thus pro-
tecting both individuals and objects.
For your safety and protection, the telephone must not be
used in bathrooms etc. as it is not splashproof.
There is always the danger of small objects being swal-
lowed by young children. In the case of the Pronto 32i,
this applies in particular to the clip of the connecting cord.
Please make sure that such items are not accessible to
children.
Location of the telephone
●
The telephone should be operated in a controlled en-
vironment with an ambient temperature of between
+5 °C and +40° C.
●
Place the unit on a smooth, non-slip surface. Normal-
ly, the rubber feet of the telephone do not leave any
marks on the surface. However, in view of the wide
range of polishes and lacquers used for furniture, it is
possible that the surface may be marked.
●
To ensure good handsfree talking quality, the area in
front of the microphone - front right - should be kept
clear. The optimum handsfree distance is 50cm.
●
Do not install the telephone in a room where large
quantities of dust accumulate; this can reduce the
service life of the telephone considerably.
●
Take care that the telephone is never exposed to di-
rect sunlight or any other source of heat, as this is li-
able to damage the electronic equipment and the
plastic casing.
●
Do not operate the telephone in humid environments
such as bathrooms.
●
The power supply connector of the NT must be
inserted.
No emergency mode!
Your Pronto 32i cannot be operated during a po-
wer failure.