Outgoing and incoming calls
42
KAP08.FM5
Pronto 32i, englisch: A30853-X300-F507-1-7619
20.5.99
Forwarding the second caller
Your Pronto 32i must be configured accordingly (
➔
page
56).
Deactivating the call signal
If you do not wish to be disturbed by incoming calls, you
can deactivate the tone ringing. In this case, you must
have programmed a key with the "Call signal off" function
(
➔
page 34). To signal an incoming call, the LED of the
"Call signal off" key flashes.
Automatic call acceptance
You can set your Pronto 32i to accept calls automatically.
In this case, you must have programmed a key with the
"Automatic call acceptance" function (
➔
page 34). When
this function is activated, the LED of the "Automatic call
acceptance" key is lit. Calls are switched directly to the
loudspeaker after a ring tone. Camped-on callers are not
switched through automatically.
g
You are conducting a call and want to forward the incom-
ing second call to another user.
<>
and
?
or
Select "Forward call?" and confirm or press the "Forward
call" key; LED flashes.
The directory number of the last call forwarding dialed is
displayed. The number can be deleted by pressing the
backspace key
<
and re-entered with
o
.
?
Confirm; the LED of the "Forward call" key goes out.
The caller has been forwarded to the selected number.
Forward call
To activate the function, press the "Call signal off" func-
tion; LED lights up.
The calls are then signalled by the flashing LED.
To deactivate the function, press the "Call signal off" key
again; LED goes out.
All calls are then signalled by tone ringing again.
Call signal off
Call signal off
To activate the function, press the "Automatic call accept-
ance" key; LED lights up.
Calls are automatically switched to the loudspeaker. The
microphone remains switched off!
To deactivate the function, press the "Automatic call ac-
ceptance" key again. LED goes out.
Calls are then accepted in the usual manner.
Autom. call accept.
Autom. call accept.
