background image

Convenient and secure telephone communication

46

KAP09.FM5

Pronto 32i, englisch: A30853-X300-F507-1-7619

20.5.99

Convenient and secure telephone communication

Activating/deactivating open listening 

If those present in your room wish to listen to your con-

versation, you can switch on the loudspeaker.

Handsfree conversing 

Even when the telephone is on-hook you can converse 

using the handsfree feature of the Pronto 32i (see also 

"On-hook dialing"

page 38). In this case, the microphone 

and loudspeaker are switched on.

Handsfree conversing before the connection is established

You can converse handsfree immediately the call is ac-

cepted.

Prerequisite: The handset is on-hook.

Handsfree conversing when a connection is open 

It is possible to switch to handsfree mode while you are 

conducting a call via the handset.

g

You are conducting a call.

To switch on the loudspeaker press the "Loudspeaker" 

key; LED lights up.

To switch off the loudspeaker press the "Loudspeaker" 

key again; LED goes out.

Loudspeaker

Loudspeaker

To activate handsfree mode press the "Loudspeaker" key; 

LED lights up. The loudspeaker and microphone are 

switched on.

At the end of the call, press the "Loudspeaker" key again; 

LED goes out.

The connection is closed, the loudspeaker and micro-

phone are switched off.

Loudspeaker

Loudspeaker

g

You are conducting a call.

and

a

To activate handsfree mode, hold down the "Loudspeak-

er" key whilst you replace the handset; the loudspeaker 

LED lights up.

The loudspeaker and microphone are switched on.

At the end of the call, press the "Loudspeaker" key; the 

loudspeaker LED goes out.

The connection is closed, the loudspeaker and micro-

phone are switched off.

Loudspeaker

Loudspeaker

Summary of Contents for Pronto 32i







































































































Reviews: