Special functions
84
KAP13.FM5
Pronto 32i, englisch: A30853-X300-F507-1-7619
20.5.99
External calls
Internal calls
Transmitting keypad information elements (IE) using the keyboard
In order to enter keypad information elements for CEN-
TREX features, CENTREX call processing must be set
(
➔
page 14).
Because DTMF signalling is the default setting for
Pronto 32i, it must first be deactivated. To do this, a key
must be programmed with the function "24=DTMF sig-
nals off?" (
➔
page 34) .
Condition: a line has been seized, a connection set up, or
an existing connection has not yet been cleared down.
Transmitting character strings as keypad information elements (IE) using a feature key
In order to transmit keypad information elements for CEN-
TREX features using feature keys, CENTREX call process-
ing must be set.(
➔
page 14).
The key which you wish to use for transmitting keypad in-
formation elements must be programmed as a keypad
number with the required character string. This is
achieved using the function "26=DTMF/keypad number?"
(
➔
page 34).
Condition: a line has been seized, a connection set up, or
an existing connection has not yet been cleared
down.
Tone (1 second)
Pause (4 seconds)
etc.
Tone repeated twice (0.3 seconds each)
at 0.4-second intervals.
Pause (4 seconds)
etc.
Press the programmed feature key "DTMF signals off?" .
o
Enter keypad information elements. The digits entered
are shown on the display.
DTMF signals off?
Press the programmed feature key
"DTMF/keypad number?".
DTMF/keypad number?
