AVANCER REMOTE
REMOTE INSTALLATION
— 3 —
1a. Mark & Pre-Drill Holes
·
Place the remote wall mount on the wall and
mark the location of the two mounting holes.
Drill 6 mm diameter holes on the marks with a
depth of 35 mm. Make sure the placement is
reachable from the toilet seat.
1c. Install Batteries
·
Put batteries into the remote control and put on
battery cover.
NOTE
: Batteries not included
1d. Hang Remote
·
Put remote into the wall mount.
1b. Install Wall Mount
·
Put the anchor into the wall holes and ensure
the wall mount is tight against the wall.
·
Align the wall mount hole with the anchor and
tighten the screw, and then cover with the
silicone gasket.
NOTE:
Please do not install and use the product in moist places such as a steam room,
or in a place where it can easily get wet.
1. Install Sensor Mount
·
The installation method depends on the wall it is being installed on. Determine appropriate installation
method and follow the instructions below.
Method A: Screw fixing
- suitable for installation on rough walls.
Method B: Adhesive fixing
- suitable for installation on tiles and other smooth walls.
Method A: Screw Fixing