AVANCER REMOTE
REMOTE INSTALLATION
— 4 —
NOTE:
Please do not install and use the product in moist places such as a steam room,
or in a place where it can easily get wet.
1a. Prep Wall
·
Clean and dry the desired installation area on
the wall. Make sure the placement is reachable
from the toilet seat.
1b. Install Wall Mount
·
Remove the adhesive tape on the back of the
wall mount and place it firmly against the wall,
then cover with the holes with the silicone
gaskets.
1c. Install Batteries
·
Put batteries into the remote control and put on
battery cover.
NOTE
: Batteries not included
1d. Hang Remote
·
Put remote into the wall mount.
Installation
area
Method B: Adhesive Fixing
