AVANCER REMOTE
USAGE INSTRUCTIONS
— 9 —
Water Temperature
:
Press the “WATER TEMP” button to adjust the water temperature
level from 0 to 5 during a cycle. The indicator will show the water temperature level if it’s
on. When the indicator is off, the water temperature level is 0.
NOTE:
The water temperature is set at 50°F at level 0. If the room temperature is higher
than 50°F , the water will not be heated.
Dryer Temperature
:
Press the “DRYER TEMP” button to adjust the dryer temperature
level from 0 to 5 during a cycle. The indicator will show the dryer temperature level if it’s
on. When the indicator is off, the dryer temperature level is 0.
Seat Temperature
:
Press the “SEAT TEMP” button to adjust the seat temperature level
from 0 to 5 during a cycle. The indicator will show the seat temperature level if it’s on.
When the indicator is off, the seat temperature level is 0.
Temperature Adjustment
Press the “LIGHT” button to turn on/off the white night light. Hold the “LIGHT” button to
enter smart night light mode - in this mode, the night light will be on or off by detecting
lightness of surroundings. Press the “LIGHT” button again to exit smart night light mode.
Night Light
