3. Electronic Store
1 x Red 5mm led - (1.7v)
1 x White 5mm led - (3.2v)
1 x 220R resistor (used with the Red LED)
1 x 150R resistor (used with the White LED)
180mm of heat tubing - 2.5 mm Black (cut 4 x 25mm, 2 x 40mm)
180mm of heat tubing - 5 mm Black (cut 1 x 180mm)
60mm of heat tubing - 5m Red (cut 2 x 30mm)
4. Hardware
1 x 4mm x 12mm long Stainless Steel button head socket head screw
1 x 2.5mm metric allen key.
1 x 4 x 0.7mm tap
Note: An alternative for the Hardware is use what you have available to suit the hole which is
3.5mm in diameter which needs to be threaded.
Note 1: Our apologies for some of the different photos showing
the stages of installation. I no longer have the game and there the
photos are a mix of older and newer stages of progress.
Note 2: Personally we love this mod as it syncs with 2 features on
the playfield which for us these inserts are hard to see as they are
blocked visually by the curly ramp.
Note 3: If you purchased a painted and pre-assembled kit you can
skip straight to page 12 but the pages in between are a good
reference if ever you need to perform some maintenance / repairs.
manual V-05
(5-10-22)
of
3
17