This mod originally came out around 2016 but was expensive due to the bumper being 3D printed
metal - in Silver (beautiful but expensive). The design has recently been tweaked a little to allow a
now full plastic bumper to be used without any distortion. Swinks Pinball is only making 5 kits
available for purchase (not feasible to make these constantly as a bit of work in painting), but with
the help of this manual you can also do a kit build yourself or pick up a kit if they are still available.
Required Parts
You will need the following parts:
1. Shapeways
https://www.shapeways.com/marketplace?q=swinkstail&sort=newest
1 x Bumper
1 x Lens
1 x Body Panel in the colour of your choice
2. Comet Pinball
https://www.cometpinball.com/collections/matrix
2 x Matrix Extension Wires - 36”
2 x Matrix Twist Sockets
manual V-05
(5-10-22)
of
2
17
