•
Now slide the body panel fully in place and install the screw / bolt to lock the body to the bumper.
The wires may restrict the close fit assembly or the lens may not be seated nicely so take your
time and install. Once assembled remove the screw & body panel and leave the wires in their
bent shape as this will make life easier when installing the mod into your game.
SAFETY NOTE
: Before you begin with fitting parts to the game, make sure that your machine is
powered off and the cord running from your machine to the wall outlet has been disconnected.
Read through these instructions completely before attempting the installation of this enhancement.
Although you may know your machine inside and out, there are a few things to consider before
proceeding.
manual V-05
(5-10-22)
of
13
17
