10
Tower Tunnel Assembly Instructions
Fig. 5
Note:
Panels are
attached
in opposite
orientations.
Tunnel Assembly:
1. Attach (2) Entry Panels as shown in (Fig. 5). At this time secure Panels to the previously assembled Crawl Tube ONLY where
arrows indicate in (Fig. 5a) and (Fig 5b).
Note: FULLY TIGHTEN all bolted joints at this time.
Note: Panels are attached opposite one another. Make certain one is attached long side up, while the companion piece is
attached longside down.
Note: Refer (Fig. 5c) for proper hardware use.
1’’ Hex Head Bolt
Washer
Loc Nut
Loc Nut
1’’ Hex Head Bolt
Washers
Fig. 5a
Fig. 5c
Fig. 5b
