INSTALLATION KITS & COMPONENTS CONT
-
6
4. Installation Kits & Components,
- Cont.
INSTALLATION MANUAL - SWIM JOY SOLAR POOL HEATER
The following is a description of optional installation and service kits that are
offered
separately. These items may be
necessary depending on the layout, installation, operation and maintenance requirements of your specific installation.
2-3045-003: ROW SPACER KIT
One of these kits is required if you need to space around a roof obstruction larger than 6"
or
an obstruction
that is
too close to the
header
, such as a skylight, chimney, vent tube, etc. It can also be used to connect different rows of
panels
into one row that
are on different roof levels or
on different roof pitches
that are facing different directions. It contains the parts
necessary to connect the rows of
panels
utilizing PVC pipe between them.
The installation process for the row spacer
kit
is detailed on page #
23.
Each row spacer kit contains: (4) 2-1810-005 Pipe Connector and (2) 2-1810-004 Panel Clamp
Assembly.
2-3045-001: ROW INSTALLATION KIT
One of these kits is required for each row of
panels
. Your DIY System Kit will include one row installation kit. It contains the parts
necessary to connect the feed and return lines to one row of
panel
s. If your specific layout requires more than one row of
panel
s,
you will need to purchase an additional row installation kit for each additional row of
panel
s. The row installation kit contains: (2)
2-1810-004 Panel Clamp Assembly, (2) 2-1810-003 End Cap and (2) 2-1810-005 Pipe Connector CPVC.
2-3020-029: REPAIR TOOL KIT
In the event a
panel
riser tube is damaged, this kit contains everything needed to make a repair to a riser tube. The repair kit
contains: (1) 2-1810-007 Plug Insertion Tool, (1)
2-1910-008
Chisel Cutting Tool and (1
6
)
2-1120-001
Repair Plug
s.
1-5115-021AS: MANUAL DRAIN DOWN BIB ATTACHMENT SET
For installations that will not automatically drain due to installation location or plumbing limitations, this set will allow you to
manually drain water from your
panels
directly at the header. This set contains: (1) 2-1810-005 Pipe Connector, (1) 429-020B PVC
Coupling, (1) 2-2015-082 Reducer Bushing and (1) Drain Bib, Brass.
2-1410-023H: VACUUM RELIEF VALVE ATTACHMENT SET, HEADER MOUNT
For installations below pool grade
or installations that will not automatically drain
, a header mount vacuum relief valve is
recommended to allow air into the
panels
when the feed and return lines are isolated with diverter or ball valves. This set should be
combined with the manual drain down bib attachment
s
et
(#1-5115-021AS)
to allow all of the water to drain from the
panel
s. This
set contains: (1) 2-1810-005 Pipe Connector, (1) 4
06
-020B PVC
Elbow, 90 Degree, Black
, (1) 2-2015-082 Reducer Bushing and (1)
2-1810-029 Vacuum Relief Valve, 3/4" MPT
.
4. Installation Kits & Components,
- Cont.