Quick Start
The Crestron® TS-1542 and TS-1542-C are touch screens with a 15.6 in. HD display and a
built-in high-performance digital graphics engine. The TS-1542 and TS-1542-C feature
Smart Graphics® technology, dual-window HD streaming video display, annotation, voice
recognition, web browsing, and a Rava® SIP intercom. The TS-1542 may be powered via PoE+
(Power over Ethernet) or 24 Vdc, while the TS-1542-C may be powered via PoDM++ (Power over
DM® technology) or 24 Vdc.
Check the Box
Item
Qty
TS-1542 or TS-1542-C
1
Bracket, Mounting (for Interface Module), Black (P/N 2016054)
1
Insert, for TS-1542-IMCW, Black (P/N 4522556)
1
Insert, for TS-1542-IMCW, White (P/N 4522555)
1
Module, Interface, TS-1542-IMCW (P/N 4522550)
1
Power Cord, 5 ft 10 in. (1.78 m) (P/N 2042043)
1
Power Pack, 24 Vdc, 2.5 A, 100-240 Vac, 2-Pin Connector (P/N 4524089)
1
Screw, 6-32 x 3/16 in., Pan Head, Phillips, Black (P/N 2007203)
2
Screw, 6-32 x 1 in., Flat Head, Slot, Black (P/N 2013235)
2
TS-1542-B-S or TS-1542-C-B-S Only
Bracket, Wall Mount, 4.63 in. x 8.16 in. x 1.53 in., Gray (P/N 4522697)
1
Cover Assembly, Bottom, Gray (P/N 4522696)
1
Cover Assembly, Top, Gray (P/N 4523045)
1
TS-1542-W-S or TS-1542-C-W-S Only
Bracket, Wall Mount, 4.63 in. x 8.16 in. x 1.53 in., White (P/N 4523502)
1
Cover Assembly, Bottom, White (P/N 4523501)
1
Cover Assembly, Top, White (P/N 4523500)
1
TS-1542-B-S, TS-1542-C-B-S, TS-1542-W-S, or TS-1542-C-W-S Only
Anchor, Wall, Plastic, #6 x 1-1/4 in. (P/N 2043585)
2
Bit, Torx
®
, T8, Security (P/N 2025915)
1
Bracket, Wall Mount, 2.70 in. x 0.31 in. x 0.52 in. (P/N 2043962)
1
Screw, 4-40 x 1/4 in., Flat Head, Torx, Black (P/N 2025311)
2
Screw, 6-32 x 3/8 in., Pan Head, Phillips (P/N 2007231)
2
Screw, 6-32 x 1 in., Pan Head, Phillips (P/N 2007251)
2
Screw, M4 x 8 mm, Pan Head, Phillips (P/N 2041962)
4
Washer, Lock, M4, 7.6 mm OD, 4.1 mm ID, 0.9 mm TH (P/N 2041964)
4
TS-1542-B-S, TS-1542-C-B-S, TS-1542-TILT-B-S, or TS-1542-TILT-C-B-S Only
Cable, Ethernet, CAT5e, 3 ft (0.91 m), Shielded, Black (P/N 2046082)
1
Cable, Ethernet, CAT5e, 6 ft (1.83 m), Shielded, Black (P/N 2045440)
1
TS-1542-W-S, TS-1542-C-W-S, TS-1542-TILT-W-S, or TS-1542-TILT-C-W-S Only
Cable, Ethernet, CAT5e, 3 ft (0.91 m), Shielded, White (P/N 2046083)
1
Cable, Ethernet, CAT5e, 6 ft (1.83 m), Shielded, White (P/N 2045441)
1
Install the Touch Screen
The touch screen installs over a standard 1-gang (horizontally mounted) or 2-gang U.S. electrical
box, a 1-gang or 2-gang European electrical box, or a 1-gang or 2-gang U.K. electrical box using
the included wall mount bracket. The touch screen also may be installed using a VESA mount
(not included).
The TS-1542-TILT and TS-1542-TILT-C models are designed to be placed on a flat surface such as
a tabletop.
Mount into an Electrical Box
To mount the touch screen into an electrical box:
1.
Hold the wall mount bracket in position over the electrical box, and mark the location of
the bracket’s two top holes on the drywall above the electrical box.
2.
Drill a small hole into both of the marked locations on the drywall, and then carefully tap
the two included #6 anchors into the drywall with a hammer.
3.
Attach the wall mount bracket to the electrical box using the appropriate mounting screws
(not included). Use the two included 6-32 x 1 in. screws to secure the wall mount bracket to
the drywall above the electrical box with the #6 anchors.
Mounting onto a 2-Gang U.S. Electrical Box
Mounting screws (4)
Screws (2): 6-32 x 1 in.
(For use with #6 anchors
to secure bracket to wall)
Wall mount
bracket
2-gang U.S.
electrical box
Mounting onto a 1-Gang European Electrical Box
Mounting screws (2)
Screws (2): 6-32 x 1 in.
(For use with #6 anchors
to secure bracket to wall)
Wall mount
bracket
1-gang European
electrical box
4.
Attach the 2.7 in. mounting bracket to the rear of the touch screen using the two included
6-32 x 3/8 in. screws. Refer to the illustration following step 5.
5.
Place the touch screen down and onto the wall mount bracket so that the teeth on the top
of the bracket engage the paired slots in the rear of the touch screen.
6.
Secure the touch screen to the wall mount bracket using the two included 4-40 x 1/4
in.
Torx® security screws
Screws (2): 6-32 x 3/8 in.
2.7 in. mounting
bracket
Screws (2):
4-40 x 1/4 in.
Wall mount bracket
TS-1542 or TS-1542-C
VESA Mounting
To install the touch screen using a VESA mount:
1.
Snap the included cover assembly top gently into place on the rear of the touch screen.
2.
Attach the cover assembly bottom to the touch screen using the two included 6-32 x 3/8 in.
screws.
TS-1542 or TS-1542-C
Cover assembly (top)
Cover assembly (bottom)
Screws (2): 6-32 x 3/8 in.
3.
Attach the touch screen to the VESA mount using the four included M4 x 8 mm screws. If
the holes on the VESA mount are too large to secure the screws, use the four included M4
washes to secure the screws properly.
TS-1542/TS-1542-C
15.6 in. HD Touch Screens
