7. Connecting the Solar Panels Together.
- Cont.
Use channel lock pliers to fully seat the
latch onto the panel clamp assembly.
Insert the locking clip through the latch
and into the panel clamp assembly
locking the latch in place.
Panel clamp assembly connection is now
complete. The panel clamp assemblies are
used to connect
panels
together
at both
top and bottom headers
, attach end caps
and attach pipe connectors.
NOTE:
On soft roof surfaces or lesser quality asphalt shingle an EPDM or aluminum pad underneath the panel clamp assembly
may be necessary to eliminate possible roof wear.
Complete Panel Clamp Assembly
Kit Part #2-1810-004
NOTE:
The spacer bars that hold the individual riser tubes together should be facing down onto the mounting surface
lifting the
panel
up off of the surface.
CONNECTING THE SOLAR PANELS TOGETHER
-
CONT.
-
1
6
INSTALLATION MANUAL - SWIM JOY SOLAR POOL HEATER