SOLAR PANEL LAYOUTS & HYDRAULICS
CONT
-
11
INSTALLATION MANUAL - SWIM JOY SOLAR POOL HEATER
6. Solar Panel Layouts & Hydraulics.
- Cont.
Figure 11.1 below details the installation locations of the mounting hardware included in each DIY System Ki
t
.
This is an example of a
common installation. Mounting locations may differ due to system location, roof truss location, roof material type, etc.
For commercial
installations please contact a Swim Joy representative for system design assistance.
Top Mounting Pad
Bottom Mounting Pad
PVC Pipe Support Bracket
Panel Clamp Assembly
End Cap
CPVC Pipe Connector
NOTE:
On soft roof surfaces or lesser quality asphalt shingle materials an EPDM or aluminum pad underneath the panel clamp
assembly may be necessary to eliminate possible roof wear.
NOTE:
The spacer bars that hold the individual riser tubes together should be facing down onto the mounting surface
lifting the panel up off of the mounting surface.
Fig. 11.1
