9
SILVER M
INSTALLATION
– OPERATING - MAINTENANCE
4.6.
Equipment attachment
Installation material is provided. This is found in the marked
equipment modules.
In order to connect the equipment components, the following tasks
are to be carried out:
-
Self-adhesive sealant is to be attached per section point to the
profile frames in two circular tracks on the equipment
component.
-
Winch the equipment components together until they are
positioned exactly together
-
Do not pull the equipment components together with the
attachment bolts. Deformation hazard!
-
The bolts can then be secured. The equipment components are
to be connected with the prescribed equipment corner angles.
-
For larger equipment depth, the modules should be connected
with additional centring threaded connections.
-
The supplied pan connector (see diagram) must be installed on
site with unit widths between 2000 and 3000mm.
-
For large pieces of equipment, the square tubing should be
additionally secured with connecting clamps
-
The section points of the outer equipment components are to
be subsequently sealed with the sealing compound as
provided.
4.7.
Ventilator installation / removal
Dismantling tracks with individual designs can be delivered as
accessories for the installation and removal of the motor or
ventilator, respectively.
For this, the motor will be transported by means of a trolley. The
drive motor can be placed on a lift wagon, for example, in front of
the unit.
