29
We reserve the right to make changes without any prior notice.
Translation from original instructions
5.7 Control panel
The unit is integrally managed by an electronic system with microprocessor, having a graphic display as interface.
The display can be used to access all the functionalities of the unit starting with the setting of the parameters and manage-
ment and analysis of any problems.
Basic operations such as starting and stopping the unit, changing the set point and checking the operating status, can be
carried out easily.
For the other operations, refer to the manual of the control that is an integral part of the documentation of the unit.
The reference for the following instructions is the main screen that is accessed, from any other screen, by pressing repea-
tedly on the button
ESC
.
5.7.1 Switching the unit on/off
Press, for more than 2 seconds, the button with .
5.7.2 Change of set point in cooling operating mode
Press the button
MENU
and the button
ENTER
twice.It is now possible to change the value of the set point, within the set
limits, with the buttons
and
.
The value must be confirmed by pressing the button
ENTER
.Pressing twice on the button
ESC
returns to the main screen.