23
We reserve the right to make changes without any prior notice.
Translation from original instructions
Tie the ropes so that they cannot come off during the manoeuvre.
After positioning, the lifting brackets can be removed.
If they have to be installed again, tighten the screws to a torque of 200 Nm.
Fig. 5 Handling the unit with lifting brackets
3.4 Storage
There are no special requirements if the unit has to be stored temporarily before installation.
Since these units are intended for outdoor installation, they withstand normal atmospheric conditions without problem.
The unit must be placed on a flat surface that is suitable for bearing its weight, in order to avoid deformation of the structure
with consequent possible breakage.
