22
We reserve the right to make changes without any prior notice.
Translation from original instructions
3.3 Handling
Before each unit handling operation, check that the lifting capacity of the machinery used is compatible with the weight of
the unit.
Handling must be carried out by adequately equipped qualified personnel.
In all lifting operations, make sure the unit is firmly secured in order to prevent accidental falls or overturning.
Lifting must be carried out by qualified and authorised personnel taking the necessary precautions; if carried
out incorrectly, lifting can cause serious damage and physical injury.
The handling operations must be carried out slowly and sudden manoeuvres and knocks must be avoided.
Do not, under any circumstances, stand or pass under or near the unit when it is lifted off the ground. Use
only the lifting system designed and prepared for the unit.
During unloading and positioning of the unit, great care must be taken to prevent sudden or violent manoeuvres, and the
components of the unit must not be used as lifting points.
Make sure the machinery and lifting ropes are of suitable size and capacity and strictly follow their operating instructions.
Use only equipment that is in excellent working order.
Check that the lifting equipment is of suitable size and capacity and strictly follow its operating instructions. Use only equi
-
pment that is in excellent working order.
All work on the unit, including unpacking and connections, must be carried out with the unit resting on the ground.
Refer, in any case, to the lifting instructions provided with the unit.
If anti-vibration mounts are installed under the base of the unit, this must be done with the unit raised by no more than 200
mm from the ground and without putting any parts of the body under it.
The unit must be lifted using only and exclusively all the yellow lifting brackets fixed to its base. It is mandatory to use a lifting
beam to ensure stability while lifting and to prevent the ropes from touching the unit.
If shipped by container, the lifting brackets are in a separate package.
To remove the unit from the container and fix the lifting brackets, see the documentation attached to the unit.
Fig. 4 Detail of the lifting brackets
