Operation
0705
TTPM3 Printer/Encoder–Technical Manual
13
3.2.1 Loading through rear document entries
Insert the ticket stock into the desired document entry. When the ticket is detected by the
input sensor it will be pulled into the active position. Consecutive ticket stock is usually
loaded in the lower document entry, and single tickets in the upper document entry.
If the printer is configured for two consecutive entries, you may also use fanfold tickets in
the upper document entry.
Upper document entry
SW97113R2
Lower document entry
Magnetic stripe
Figure 7. Position of the magnetic stripe when loading paper
3.2.2 Paper
stock
positioning
The ticket stock should be oriented with the magnetic stripe down to the left as seen from
the front of the TTPM3. It is good practice to place the pile of fanfold tickets at a distance
of at least one ticket length behind, and straight out from the printer.
SW97116R2
90°
Figure 8. Positioning the ticket stock
