Programming
26
TTPM3 Printer/Encoder–Technical Manual
0705
4.5.3 Print-data
commands
1
!F T
text
35
!F G
graphics
36
!F C
bar
code
38
!F M
Specifies No. of r cancellation text to be printed if encoding fails
40
!F L
logotype
?
4.5.4 Magnetic encoding/decoding commands
!B 1
Encode data in Hex format on track 1
42
!B 2
Encode data in Hex format on track 2 (or center track)
42
!B 3
Encode data in Hex format on track 3
42
!N
Same as !B 2, for compatibility with TTPM2
2
!N+
Same as !N but reverses the bit order
!K
Same as !B 3, for compatibility with TTPM2
!K+
Same as !K but reverses the bit order
!O 1
Reads data in Hex format from track 1 (or center track)
43
!O 2
Reads data in Hex format from track 2 (or center track)
43
!O 3
Reads data in Hex format from track 3 (or center track)
43
!J
Encode data in ISO format on track 1
43
!M
Encode data in ISO format on track 2 (or center track)
43
!I
Encode data in ISO format on track 3
43
!D A
Reads and decodes data in ISO format from track 1, 2, and 3
43
!D 1
Reads and decodes data in ISO format from track 1
43
!D 2
Reads and decodes data in ISO format from track 2 (or center track)
43
!D 3
Reads and decodes data in ISO format from track 3
43
!D
Same as !D 2, for compatibility with TTPM2
4.5.5 Storage
commands
!H P n1 n2
Set parameter value
48
!H S
Store current parameter values
48
!S P n1
Parameter value enquiry
49
!H F
Load Firmware
49
!H C
Load
Font
50
!H C E
Erase all Fonts
50
!H L
Load
Logotype
?
!H L E
Erase all Logotypes
?
1
See note about Ticket memory on page 23.
2
Grayed commands are obsolete, or not yet implemented (firmware version 5.12)