background image

-11-

9.2

How to e

nter the programming mode:

1.

Press

 

the

*

 

button and after a "Di" sound is heard, enter the programming

code

.

 Another "Di" sound is heard.

2.

Note, the system will exit the programming mode automatically if no action is made 

within 30 seconds.

To exit the programming mode, press the    

 button

 at any time.

The factory default unlocking time is 1 second. It can be changed from 01 to 99 

seconds.

1. To change the unlocking time, enter the programming mode.

2. Press 00 and when a "Di" sound is heard, enter 2 digits (01-99), indicating the

new unlocking time. Another "Di" sound is heard; it in

d

icates the new 

setting has been suc

c

essfully modified.

3. Press the      button to exit the programming mode.

9.3

Set the unlock time

:

*

*

1. To add user codes, enter the programming mode.

2. Enter 2 digits from 01 - 40

, then a "Di" sound is heard.

3. Enter the new 2-6 digits code. Another "Di" sound is heard; it in

d

icates the new

user code has been successfully added.

4. Press the      button to exit the programming mode.

Note, the digits 31 - 40 are designed to work with the factory default unlocking 

time only, which is 1 second.

9.4

Add user 

codes

:

*

1. To 

delete

 user codes, enter the programming mode.

2. Enter 2 digits from 01 - 40

, then a "Di" sound is heard.

3.

*

Press the     button to confirm. Another "Di" sound is heard; it in

d

icates the user

code has been successfully deleted.

4. Press the      button to exit the programming mode.

9.5

Delete

 user 

codes

:

*

Summary of Contents for SVT-IP A

















Reviews: