-6-
Step
1
2
: Return to the main interface. The setup is complete and ready to
receive calls and monitor the SVT-IP outdoor station.
6.1.2. Android users:
Step 1: Once the ControlCam App is downloaded and installed, ensure your
smart phone or tablet is connected to the same Wi-Fi network as the one you are
going to connect the SVT-IP system;
Step 2: Attach the Antenna to the Wi-Fi pin on the back of the outdoor station;
Step
3
: Open the ControlCam App, and select "Enter Now";
Step
4
: Select "Add a Device";
Step
5
: Select "Add a New Device";
Step
6
: The App will start searching for an online outdoor station;
(If not found, try it again and ensure the smart phone/tablet is in rage of the Wi-Fi network)
Step 7: Select the outdoor station to be configured, then select "Start configuring";
Step 8: Select the Wi-Fi network, input its password. The configuration starts
automatically and it takes 100 seconds to be completed;
Step 9: Once the configuration is completed, select "OK" to confirm;
Step 10: Input the default User Name (admin) and Password (1234), then select
"OK" to confirm;
Step 11: Go back to the device list and select "..." on the top right corner of the
screen, then select "ON" in the Outdoor call-in option.
