-12-
1. To delete user codes directly, enter the programming mode.
2. Press the # button and after a "DiDi" sound is heard, enter the 2-4 digits user
code you would like to delete.
3. A long "Di" sound is heard; it in
d
icates the user code has been successfully
deleted.
4. Press the button to exit the programming mode.
9.6
Delete user codes directly
:
1. To set the length of the user codes , enter the programming mode.
2. Enter the number 99 and after a long "Di" sound is heard, enter 2-6 indicating
the length of the user code.
3. A long "Di" sound is heard; it in
d
icates the user code has been successfully
deleted.
4. Press the button to exit the programming mode.
9.7
Setting the length of the user codes
:
*
*
1. To
delete all settings including restoring the unlocking time
to factory default
and deleting all user codes
, enter the programming mode.
2.
Press the # button; a "Di" sound is heard. Then press the # button again.
3. A long "Di" sound is heard;
then press the # button 7 times. After 3 seconds,
another long "Di" sounds is heard.
4. Press the button to exit the programming mode.
9.8
Delete all settings
:
*
1.
Switch off the power, press the # button and hold.
2. Switch on the power and after a long "Di" sound is heard, release the # button.
Note, the system resets the programming code back to 1234 and deletes all
programmed user codes.
9.9
Restore to factory default mode
:
