-10-
8.6
How to delete a device:
Step 1: Select "..." on the top right corner of the screen;
Step 2: Select "OFF" in the Outdoor call-in option;
Step 3: Select "Edit", then "Delete";
Step 4: Select "OK" to confirm the action and delete the device.
8.7
Change the unlock code:
Step 1: Select "..." on the top right corner of the screen;
Step 2: Select "OFF" in the Outdoor call-in option;
Step 3: Select "Unlock password setting";
Step 4: Input the old code, then input a new code;
Step 5: Select "Setting" to save the changes.
9
.
How to set up the
SVT-IP
Outdoor Station's
u
ser
c
odes
* The original factory default programming
code
is 1234.
* 40 groups of
2-6
digit
codes
can be programmed to unlock
the door.
The default
code
leng
th
is 4-digit. Follow
instruction #
7
before programming a new
code
if you would
like to change the default length.
* The following instructions are for the SVT-IP Outdoor Station
A only.
9.1
Set up a new programming
code
:
1.
Switch of
f
the power, press the
*
button and hold, then switch on the power.
After
a
long "Di" sound is heard, release the button.
2. When the long "Di" sound stops, enter the new
2-6
digit
s
code
.
Another "Di"
sound is heard. The new programming
code
has been
successfully
modified.
3. Press to exit the programming mode.
*
*
