-8-
Step
5:
You can now connect the RJ45 cable to the SVT-IP Outdoor Station and
then connect the Ethernet cable to the router.
Step 6: The setup is complete. You can now remove the antenna from the SVT-IP
Outdoor Station.
6.
3
How to add additional users to the SVT-IP Outdoor Station:
Step 1:
Open the ControlCam App, select "Enter Now"
;
Step 2: S
elect "Add a Network Device"
;
There are three ways to add additional users to the SVT-IP Outdoor Station:
a.
LAN Search:
Select "LAN Search"
and select the outdoor station that you would like to add.
Input the default user name and password, then select "Ok" to confirm.
b.
QR Code Scan:
Select "QR Code Scan", input the default user name and password, then select
"OK" to confirm.
c
. Manually Input:
Select "Manually Input", input the outdoor station's GID, then input the
default user name and password. S
e
lect "OK" to confirm.
Step 3: Select "..." on the top right corner of the screen;
Step 4: Select "ON" in the Outdoor call-in option. Return to the main interface. The
setup is complete and ready to receive calls and monitor the SVT-IP outdoor
station.
6.
4
How
to r
eset
the SVT-IP
Outdoor Station to factory default:
If the outdoor station has been previously connected to a Wi-Fi router, you must
first reset it to factory default prior t
o connect
ing
it again
to a new Wi-Fi router
:
Step 1: Unplug the outdoor station from the power outlet.
Ste
p 2: Power it back on
Step 3: Hold the call button for 45 seconds, until the LED light flashes and a "Bi..."
sound is heard.
