SVS-Vistek HR Series, Manual

Page: 63 / 102

SVS-VISTEK
Feature description 63
Sequencer setup with SVCapture
Starting with SVCapture 2.5.2, there is a sequencer assistant, providing
easy setup of the sequencer settings. The assistant will help you to setup
timings for start exposure and lighting and so on. The PWMs are
connected to the physical outputs (e.g. for driving LED lights)..
For making the sequencer work in general, have a look into the
GenICam tree or even more simple into the I/O assistant. Connect the
the I/O lines as below:
You may start the sequence with a hardware trigger input signal
(sequencer is connected to Input 1). As an alternative you might use a
software trigger. For software trigger setup, adjust as below:
Feature Name Feature Value
Acquisition Control - Acquisition Mode Continuous
Acquisition Control – Trigger Selector - Trigger Mode On
Acquisition Control – Trigger Selector - Trigger
Source
Line 1
Acquisition Control – Trigger Selector – Exposure
Mode
Trigger Width
Enhanced IO – PWMEnable On
Enhanced IO – SeqEnable On
The Exposure mode „trigger width“ makes exposure start at a certain
timing (Seq pulse A) and stop at Seq pulse B. In the GenICam tree this