SVS-VISTEK
The HR Camera Series
16
5
The HR Camera Series
Focusing on details
The SVCam HR series is a series of industrial machine vision cameras
featuring especially on very high image resolutions and interface high
speed without compromising on image quality. Camera sensors and
interfaces are built to deliver maximum sensor and interface bandwidth.
With this kind of high resolution sensors being already very large, the HR
series comes with an M58 mount with the possibility to adapt for any kind
of lens.
High end CCD and CMOS image sensors with high resolutions permit
swift and effortless capture of a wide field of view, making this camera
series your prime choice for demanding applications such as optical
metrology, quality monitoring, wide field surveillance or traffic monitoring.
Camera Link Features
Camera Link is the most direct interface connection to the camera sensor
and preferred by integrators with high demands on bandwidth and
especially low latency times.
Please note, as operating Camera Link always involves a frame grabber,
the specs given in the
specifications
might differ from your setup. Please
contact us for a recommendation of frame grabbers.
Depending on your camera model, following Camera Link specifics might
apply (Please refer to the technical data of your specific camera model):
>
There are different transfer rates with different camera link types.
Camera Link full (80 bit technology) is also known as “Camera
Link Deca”
>
Some models support Power over Camera Link (PoCL). Please
note, in case you use the 4IO PWM outputs to drive your lights,
you need an external power supply as the PoCL is unable to
deliver the high currents requested.
4IO adds Light and Functionality
Your SVS-Vistek camera is equipped with the innovative 4IO-interface
allowing full light control, replacing external strobe controllers. Each of
the outputs can be individually configured and managed using pulse-
width modulation. With its high current output, the camera is able to drive
LED lights directly without external light controller.
4IO concept with up to 4 switching LED lights
Summary of Contents for HR Series
