SVS-Vistek eco4050, Manual

Page: 9 / 138

SVS-VISTEK
The EVO Series 9
3.3 4IO adds Light and Functionality
Your SVS-Vistek camera is equipped with the innovative 4IO-interface
allowing full light control, replacing external strobe controllers. Each of
the outputs can be individually configured and managed using pulse-
width modulation. With its high current output, the camera is able to drive
LED lights directly without external light controller.
If you attach any light to the camera, make sure the power supply has
enough power not to fail when the camera is putting light ON.
The integrated sequencer allows multiple exposures with settings to be
programmed, creating new and cost effective options. Logical functions
like AND / OR are supported.
>
Up to 4 x open drain high power OUT
>
Up to 4 x high voltage IN – TTL up to 25 Volts
> Power MOSFET transistors
>
PWM strobe control
>
Sequencer for various configurations
> PLC fuctionality with AND, OR and timers
>
Safe Trigger (debouncer, prescaler, high low trigger)
Figure 1: 4IO concept with up to 4 switching LED lights