SVOA Iris M548SR, User Manual

Page: 76 / 202

BIOS Utilities
5 - 2 The Power-On Self Test (POST)
5
The Power-On Self Test (POST)
Each time you turn on the computer, the system takes a few seconds to conduct a
POST , including a quick test of the on-board RAM (memory).
As the POST proceeds, the computer will tell you if there is anything wrong. If there
is a problem that prevents the system from booting, it will display a system summary
and prompt you to run
Setup .
If there are no problems, the Setup prompt will disappear and the system will load
the operating system. Once that starts, you can’t get into Setup without rebooting.
POST Screen
1. BIOS information
2.CPU type
3.Memory status
4.Enter
Setup prompt
appears only during
POST
Note: The POST screen
as pictured right is for
guideline purposes only.
The
POST screen on
your computer may ap-
pear slightly different. If
you disable the
Boot-
time Diagnostic Screen ,
the POST screen will not
appear.
Figure 5 - 1
POST Screen
Phoenix TrustedCore(tm) NB
Copyright 1985-2005 Phoenix Technologies Ltd.
All Rights Reserved
Bios Version: ******
KBC/EC Firmware Version: ******
FSB 200*4MHz DDR667 CL=5T Single Channel 2T ,CPU ID = 06FD
CPU = 1 Processors Detected, Cores per Processor = 2
Intel (R) Core(TM)2 Duo CPU T7100 @ 1.80GHz
632K System RAM Passed
1790M Extended RAM Passed
2048 KB L2 Cache
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: Optiarc DVD RW AD-7530B
Fixed Disk 0: FUJITSU MHV2100BH PL
Mouse intialized
Press <F2> to enter SETUP
1
2
3
4