GX301
13
SVAT ELECTRONICS
now you can see
INSTALLATION
To plug receiver in:
1. Make sure that the receiver is set up no more then
100ft from the camera. This is to ensure a strong signal
between the camera and receiver.
2. Plug the receiver’s power adapter (marked for receiver)
into the receiver’s power input area (marked “9V DC”).
3. Plug the other end of the power adapter into a power
source (surge protected power source recommended).
4. To view and hear the camera, you must connect the
receiver to a monitor.
PLUGGING IN RECEIVER
Once the receiver is connected to a power source it will automatically turn on and pair with the camera. If the cam-
era and receiver do not automatically pair please see “PAIRING” Pg 14.
Plug into Surge Protected power source
To plug receiver into Monitor:
1. Plug single end of the A/V cable into A/V out area on back of receiver.
2. Plug the video jack (yellow) into the video input on your monitor and the audio jack (white) into the audio input
on your monitor.
3. You may have to adjust the channels or video source input on your monitor to view the footage.
4. Once the proper channel is set, the footage from the camera will display on the monitor.
PLUGGING RECEIVER INTO A MONITOR
The GX301 comes equipped with an audio/video cable that can be plugged into any monitor with an audio/video
input. Once plugged in, you will be able to watch and hear live video, access and view the menu as well as watch
playback footage from your SD card.
Plug adapter into 9VDC
Plug A/V cable into A/V out on receiver
Plug A/V cord into monitor
