GX301
12
SVAT ELECTRONICS
now you can see
INSTALLATION
MOUNTING THE CAMERA
1. Decide if the camera will be wall-mounted or sitting on
a desk/tabletop. The camera can be adjusted for many
mounting scenarios by rotating it to the required position.
• Keep in mind that the camera is microphone
equipped. If you would like audio recorded, make sure
the camera is within a close enough range of the area
being monitored to record any sounds (within 6 ft)
• Be sure to mount the camera no further than 100ft
away from your receiver
• Be sure to mount the camera no further than 8ft away
from a power source
2. Screw the mounting bracket into the camera’s mounting
hole, turning it clockwise.
3. Ensure that the camera is strongly secured into
the wall.
4. Adjust camera to the desired viewing angle.
5. For additional help with mounting the camera, please see
the drilling template located at the back of the manual.
6. Once you have mounted the camera and placed it at the
desired viewing angle, plug the camera’s power adapter
(marked for camera) into the cord on the camera and then
plug the adapter into a power source. (A surge protected
power source is recommended.)
7. If you purchased a kit with additional cameras, repeat the
above steps for all additional cameras.
Adjust camera to desired viewing angle
Ensure the camera is secure
Note: The above photos are examples of mounting
a camera, your camera will look different
from the above images.
Plug power adapter into Camera’s cord
Plug into Surge Protected power source
